防撞墙模具是参照对于混凝土防撞护栏的制作标准，将不同外形特点的防撞墙模具通过钢板连接的方式生产出来，这种简单化的钢模具满足了对于公路防护的需求。按照施工图纸来定制防撞墙模具，大部分模具都在一米左右，这样方便运输，可以两个人抬起来不用一些机器搬运。防撞护栏一般安装在公路周围，与防撞墙一样，都可以减少发生事故时，汽车迎面而来带来特别大的冲击力。防撞墙模具大部分为钢板连接而成的，不同的模具长度不同，使用钢板的厚度不同。
The anti-collision wall mold is produced by referring to the production standards for concrete anti-collision guardrails, and connecting anti-collision wall molds with different appearance characteristics through steel plates. This simplified steel mold meets the needs of highway protection. Customize the anti-collision wall mold according to the construction drawings. Most of the molds are around one meter long, which is convenient for transportation and can be lifted by two people without some machine handling. Crash barriers are generally installed around highways, similar to crash walls, which can reduce the impact of oncoming cars in the event of accidents. Most of the anti-collision wall molds are made of steel plates connected together, and different molds have different lengths and thicknesses of steel plates used.
按照常规高速防撞墙模具的制作，采用的面板厚度为3毫米，筋板厚度为5毫米，如果每段长度达到2米的防撞墙，可以选择4毫米的面板。常用高速定网站建设  伺服液位仪  防撞墙模具 唐山护栏 遮阳网 风电基础模具防撞墙模具主要根据施工图纸而言的，在常用高速防撞墙模具中，关于模板的规格大小不仅要与施工公路相对应，而且在生产成本，人工操作等方面都要考虑到，这就要厂家在高速防撞墙模具上的介绍多一些了
According to the production of conventional high-speed anti-collision wall molds, the thickness of the panel used is 3mm, and the thickness of the rib plate is 5mm. If each section of the anti-collision wall reaches a length of 2 meters, a 4mm panel can be selected. The commonly used high-speed anti-collision wall molds are mainly based on construction drawings. Among the commonly used high-speed anti-collision wall molds, the size of the template should not only correspond to the construction road, but also take into account production costs, manual operations, and other aspects. This requires the manufacturer to introduce more about the high-speed anti-collision wall mold